Ok so in D2 we're making our own company logos and designs and all that and it there isn't a wide variety on brushes for the stroke you can use on here so I made one that I liked more than the default ones.
#1. Instead of just using a straight line I'll use a swirl:
#2. After you have one swirl go ahead and copy and paste another one but make sure to make the second one a little smaller so they don't match up exactly.
#3. Then go up to you tool bar and click the Direct Selection Tool.
#4. With that arrow select only the place at the tip where your two swirls meet.
#5. After you've selected that go up to Object, down to Path, and select Joint.
#6. Now you can see that these two lines are joined.
#7. Now go to the other end of your swirl and with the direct selection tool do the same thing (Object, Path, Join)
#8. And now you can see that these two ends are joined.
#9. And now it's one swirl instead of two:
#10. Now just go up to your color swatches and select a filler color
#11. And this is what it looks like!!!
#12. Now this is the swirl with the stroke I made compared to the stroke to the default brush:
No comments:
Post a Comment